In order for your wooden privacy fence to last, it needs regular maintenance. What you have to do and how often depends on the type of wood you choose.
You sit comfortably over coffee and cake in the garden and suddenly the neighbor calls out unequivocally how many pieces you have already plastered. Nobody needs that much curiosity and is one of the reasons why patio owners choose a privacy fence. The chic elements, which are made of wood in most cases, also serve as a windscreen.
Despite pretreatment by the manufacturer, the privacy protection elements, like your garden furniture, need appropriate regular after-treatment (wood care tips for garden furniture, see www.heimwerker-news.de). How often and intensively you have to take care of the privacy fence mainly depends on the type of wood used.
➡ Read also: Privacy screen in the garden: These are the options
Small wooden lexicon
|Spruce||good drying, low tendency to tear, stainable, easy to paint|
|jaw||stainable, easy to paint, glaze and paint, sometimes very resinous|
|larch||high weather resistance, very hard wood, low swelling behavior|
|robinia||hard wood still elastic, poor impregnability, tendency to crack|
|Douglas||good weather resistance, very low absorbency for water, good strength|
Privacy fence made of wood - how often to care for?
It is a question of personal taste whether you choose a fence made of wood or metal. My personal favorite are wooden elements (see photo on the right), but they also need a little more care than their metallic counterpart. But don't worry, you don't have to do brush and paint bucket work every month to preserve the beauty of this natural product.
As a rule of thumb for the renewal of the paint:
- Impregnation glazes annually
- Thin-layer glazes every two to three years
- Thick film glazes every three to five years
- opaque coatings every five to seven years.
" Note: In order to avoid any unpleasant rust spots, make sure when purchasing that the screws for connecting the elements are made of stainless steel.
Repaint the wooden privacy screen»Step by step instructions«
Wood is a natural product, which "works" later. Cracks are therefore not completely avoidable and in most cases completely harmless. If the posts are affected, make sure that they are adequately fastened.
Step 1 - cleaning the privacy screens
Over time, a lot of dust, spider webs and insects are deposited on the wooden surface. All of this must be removed before you start painting. Either you go to work with good old man power (wash liquor and brush) or you take a Kärcher. Pay attention to the pressure - do not set too much so as not to destroy the elements.
Step 2 - paint the privacy fence
A little preparatory work is still necessary before you can start. To avoid "mess" on the terrace floor, cover the surrounding areas with blankets or newspapers, or use masking tape for narrow areas.
Various materials are available for painting:
|Wood Stain||if the grain is transparent, the darker the color, the higher the UV protection, durability approx. 2 - 3 years|
|wood color||high coverage but concealment of the grain, good UV protection|
|wood oil||maintains the grain, highly resilient, protects and cares very well, use colored oil for better UV protection|
➠ Let the first coat dry well
Only paint when the weather is nice so that the privacy screens can dry well. How long this takes can be found in the manufacturer's instructions. Depending on what you have chosen, several coats of paint are necessary. With glazes, a single coat is sometimes sufficient.
➠ Don't forget the spaces
The large areas can be painted without problems. It gets tricky if you want to apply the wood protection between the individual elements. A narrow, curved brush makes work easier! Make sure that you really catch every gap, otherwise there is no longer any protection against the sun and the weather.
- Thoroughly clean the screen elements before painting.
- Glazes best protect and preserve the natural look of the wood.
- Let the paint dry well and repeat if necessary.
- Don't forget gaps!